Vapo 2

With this small, hand-held vaporizer it is possible to enjoy your favorite smokables without inhaling the damaging smoke. The vaporizer is made of almost unbreakable space age glass and consists of a bulb (diameter 5 cm) and a tube (10 cm) joined together by a plastic cap.
The only thing you need is a lighter and something to vaporize.

Usage

To use the Vapo 2, you must take the tube from the bulb. Don' t use excessive force.
• Rinse the inside of the bulb and shake it almost dry
• Put very little crumbled weed or hash in the bubble
• Screw the bulb back on the other half of the Vapo 2
• Heat the bulb while rotating
• Once the bulb fills up with vapor: inhale!
• Cool, isn't it?

You can also use the Vapo 2 to make a water bottle pipe. Take a plastic bottle or a aluminium can. Punch a hole in the bottle or can, half an inch above the water level. Put the tube in the hole so that it is under water.

To clean the Vapo 2, fill to about 1/3 with cleaner and soak for a while. Turn the bulb around to allow the cleaner to dissolve film from walls. Rinse with water. Use scrub pad if necessary.
Clean the tube by holding a hot flame under it so that the residue built up vaporizes. The resulting vapor is sometimes the best. After the residue has fully vaporized, the tube can be cleaned by running a small wad of steel wool through it.

You can download an instruction manual here.

Links

www.vapo2.com

Reviews

Post a review  More reviews

Dec 31, 2007 psydro said:
    
“very good vapo better then my electric one actualy this one realy does vaporize the resine the extract or what ever you put in it ! just a thin if you're stuff is dry you may wana add drop of water it's really one of a best way to extract essetial oil, or if you know any other that my be cool ?!”

Jul 19, 2007 scheap ass said:
    
“I Always use an clear E27 Incandescent light bulb 40W-100W. It works very fine and is a lot cheaper 1.7euro or less. this sounds maybe a little reared but the taste is a lot better if you add a few ml or just a few drops of water.
the weed first boils in the watter and essential aromatic oils are released. the hasj oil dissolves a little in the water and when the water is almost completely vaporised, the hasj oil comes of. (water extracted hasj oil) you really getting stoned at this point. because the weed is moisture its absolutely doesn't burn at all since the boiling temperature is 100°C, the weed keeps his green color and fine aromatic taste.
If you heat it long enough the weed drys and the temperature slowly climbs like you do it without water. It is very soft in the longs because the vamper is moisture and the oils comes of more slow. But it takes more time and it is not so simple to do it in a windy environment like outside. maybe you can compare this proses a bit with steam distillation. works all sow with dmt it has a vapor temperature of 60°C so it comes of before the water.”

May 17, 2006 Ethno said:
     
“I love this product, my lungs already feels better just after ushing it for a week and i love the high feeling i get from it, i get high even with hash that when its normaly smoked kicks me out.
Im ushing a alcohol burner instead of a gas ligther because it dont make smog on the outside of the glas.
Buy this Product NOW!!!”