Noble Vapor VP300

The Noble Vapor VP300 is a low budget conduction vaporizer designed for those who cannot afford a more expensive convection based vaporizer. Convection means hot air flows through the herb, while conduction means the herb is in direct contact with a heating element.

The herb is placed in a hot metal bowl so its essential oils are released into a fine vapour, which collects in the globe until it's inhaled. This vaporizer is very easy to use and is ready in only three minutes.

The VP300 vaporizer is cost-efficient (cheaper than most electric vaporizers) and maintaining it is even easier. Only the metal bowl and tube require cleaning after usage. It is fairly easy to remove debris from the metal bowl.

Included are a tube with a glass mouthpiece and an illustrated quick start manual.

Usage

1. Click the button to turn the device on. Blue, green and red LEDs will light up.
2. Turn the dial to the desired temperature.
3. Hold vaporizer base as you carefully lift up the glass cover. Warning! Do not touch the hot heating cup!
4. Grind your herb.
5. Put a layer of 1 to 8 mm of grinded herb in the heating cup, and put on the glass cover again.
6. After approximately three minutes as you see the vapour collecting in the globe, put the tube into the vaporizer.
7. Inhale through the glass mouthpiece.
8. Enjoy!