Noble Vapor VP600

The Noble Vapor VP600 heats up rapidly and has a built-in fan to facilitate airflow into the vaporizer. This makes inhaling smoother and the fan also helps to control temperature by circulating new air into the vaporizer.

The digital display shows the temperature both in Celsius and Fahrenheit as well as current and set temperature. Temperature control on this vaporizer is flawless and it can go up to 298 degrees Celsius. The frame of this vaporizer is made from pure metal, giving it extra protection and endurance.

• digital temperature adjustment controls
• 40W ceramic heating element
• includes a cooling fan to help control and stabilize temperatures
• maximum temperature of 298 degrees Celsius
• glass whip (filling chamber) included
• 5 replacement screens
• blue, green and red LED lights when vaporizer is turned on

Usage

1. Switch on by clicking the button on the back of the device.

2. Turn the temperature controller to the desired temperature. The optimal temperature is 180 degrees Celcius (356 degrees Fahrenheit), though the correct temperature setting varies depending on the type of herb used and the preference of the user.

3. Grind the herb.

4. Load between 3 to 6 mm of the grinded herb into the glass whip.

5. Carefully insert the whip into the heating chamber. Insert only 95% of the whip to assure it doesn't get stuck. If the whip gets stuck, pull straight back. Do not twist it because that might damage parts of the vaporizer.

6. When the herb has lost its aromas let the whip cool down a bit and keep it over an empty container or trash can and exhale to discard the spent herbs. If herb contents are stuck due to not discarding herbs while heated, then reheat herbs by inserting the whip into the heating chamber again and inhaling. The heat will cause the herbs to loosen up, so they can easily be taken out with the wooden stir tool.

7. Let the unit cool down before shutting off power.

Warning

Parts of this vaporizer can get extremely hot, so keep it out of reach of children, pets and combustible materials!

Reviews

Post a review  More reviews

Aug 15, 2009 JRza said:
     
“This vaporizer is a great investment, i have had it for over 6 months and never had a single problem. The fan works perfectly to stabilize the desired temperature. I have bought over 3 more for my friends who love them as well. This vapo is legit. ”

Jun 4, 2009 420 said:
    
“The fan control was malfunctioning on my device; it would turn on and cool it before it even reached the desired temperature and never allowed it to get above 170 (C), so I opened the device and disconnected the fan from the circuit board and now it works great -- the temperature easily stabilizes at temperatures above about 120 (C) due to the heating element automatically turning on and off as needed to keep it at that temperature. Varies by about 1-2 (C) but otherwise precise. The temperature sensor and display is also very reliable as I have measured real-time values with an actual thermometer. I would recommend using the device at around 165 (C) to ensure there is no combustion, as when you set it at the optimal temp of 185 (C) (reference: NORML study) the layer of herb closest to the heating element combusts. Only 4 stars were given due to the fan issue, otherwise this vape is absolutely amazing for the value.”

Mar 28, 2009 krish said:
     
“I have one of those for several months now.
It is absolutely worth the money!”