Noble Vapor VP110

The Noble Vapor VP110 features a silver-colored metal body with a glass foot. When you turn it on the blue, green and red LEDs put on a nice light show. The design of this vaporizer is futuristic looking, but it is still very easy to use, portable and affordable.

Glass whip included
Nicely polished zinc metallic body
Lights up (Multi-color LED)
Easy to use, ready in minutes
5 replacement screens

Usage

1. Turn the heat control dial to the desired temperature, for example 190 degrees Celsius, and allow the VP110 to warm up for about 5 minutes.

2. Grind the material you want to vaporize and put it in the glass whip, which you keep in such a way that the warning sticker which says "HOT" is turned upside down. Do not put too much at once. A thin layer of half a centimeter thick is best.

3. As you keep the filling chamber turned upside down, pick up the VP110 and turn it upside down as well. Slide the tip of the heating element into the filling chamber and, while holding them together, place the VP110 on the table again.

4. Begin by taking a few short and fast puffs through the tube. For each consecutive puff, slow down your breath. The slower you inhale, the hotter and stronger the resulting vapour will be. Experiment until you find your ideal breath and temperature range preference on the knob. You will quickly get a feel for this.

5. If the material starts to blacken, turn down the temperature a little or inhale faster. After a few inhalations you will notice your exhaust thinly decreasing, indicating that the material is depleted of its essential oils.

6. Once the material is "spent" and you've allowed the filling chamber to cool down sufficiently, carefully turn the set upside down again and disconnect the filling chamber. Use the wooden stir tool to help remove any stuck material.

Maintenance

The tubing and glass filling chamber can be cleaned by running hot water through them from the mouthpiece down. If build up occurs, soak ONLY the glass mouthpiece in alcohol overnight.